How to Refill Your Squeaky Clean Hand Sanitizer Pump in Bulk

Quick Answer

Refilling your Squeaky Clean Hand Sanitizer Pump from a bulk container saves money and reduces plastic waste. The key is to avoid overfilling and to clean the pump mechanism before reassembly.

Step-by-Step Refill Process

1. Empty the Bottle Completely: Use the remaining sanitizer until the pump no longer dispenses any liquid. Unscrew the pump cap and pour out any residual drops. A common mistake is to leave a small amount, which can dilute or contaminate the new sanitizer.
2. Clean the Pump Mechanism: Rinse the pump stem and cap under warm water. Use a small brush to remove any dried residue from the tube. Let all parts air-dry completely before reassembly. A common mistake is to skip drying, which can introduce water into the sanitizer and reduce its effectiveness. Drying is essential to maintain the sanitizer's alcohol concentration.
3. Fill the Bottle: Pour your bulk hand sanitizer into the clean, dry bottle. Fill only to the shoulder of the bottle (where the neck meets the body), leaving about 1 inch of air space. A common mistake is overfilling, which prevents the pump from creating proper suction. Overfilling is the most frequent cause of a pump that stops working.
4. Reassemble and Prime the Pump: Screw the pump cap back on tightly. Pump the dispenser 3-5 times until sanitizer flows smoothly. If you hear a sucking sound but no liquid appears, unscrew the cap and check for a kinked tube or a blocked nozzle. If the pump still doesn't work, the tube may be too long and hitting the bottom; trim 1/4 inch off the tube with scissors.

The Product You'll Use

• Squeaky Clean Hand Sanitizer Pump: The Squeaky Clean Hand Sanitizer Pump from Megababebeauty has a pump bottle design for easy, mess-free dispensing. This means the bottle is built to be refilled, but you must clean the pump tube and cap to prevent clogging.